How to Program EEPROM with Tacho Pro 2008

An EEPROM (Electronically Eraseable and Programmable ROM) can be a ROM chip which can be reprogrammed and cleared for many instances quickly and accurately. EEPROM chips are widely utilised in many automobiles and trucks. The other day, a a buyer known as me, asking ways to programming his BMW EEPROM with our Tacho Pro 2008. To work with Tacho Pro 2008, please follow the instructions under.

Step 1. Clean the EEPROM chip. Make sure there's no paint or dust on it.

Step 2. Put oscillators around the board together. Put oscillators around the board together-Tacho Pro 2008

Step 3: Place the clip on the EEPROM.

Step 4. Connect adapter-board to Tacho Pro 2008 and power up the mileage correction tool.

Step 5. Place the other end of your clip towards the 8 pin port on the adapter-board with all the red cable on the pin 1 mark, as image shown below.

Step 6. Select the auto model around the key menu, and after that click OK. The Tacho Pro will then read the EEPROM and enter towards the EEPROM menu.

Step 7. Save all information together with the menu SAVE in the event the value shown inside the machine is alright.

Step 8. Visit the KM adjustment menu, fill within the new worth, along with the Tacho 2008 will confirm when the EEPROM is effectively programmed.

Step 9. Get rid of the clip from the EEPROM.